|
FORWARD CABIN:
- Port cabin as per drawing
- double berth with head oriented aft
- shelf on hull side
- low Locker next to the bed including one drawer and a door under
- locker above washer/dryer right from the entrance
- combo washer/dryer whirlpool 220V/50HZ
- Head furniture to be teak veneer with bulkheads in Formica. Head
- counter tops in culture marble.
- Stereo in cabins with loudspeaker in owners' cabin, AMlFM CD player Clarion with two speakers.
- Same for guest cabin.
GALLEY AND DINETTE:
- Galley to include :
- two Coolmatic fridges facing fwd
- two storage space in corner
- double sink with Corian covers and cutting boards
- raw of drawers under sink as well as lockers with shelves
- electric cook top. combo oven. pot & pan drawer
- glass rack with two doors with clear glass
- garbage bin under the steps
- two Gaggenau galley blowers in the countertop on both sides of the cooktop
- electrical cooktop Gaggenau
- oven Gaggenau type EM203
- Gaggenau engine blower in one of the corners of the galley
- Dinette with hi-lo table to convert in berth for two.
- Table to have maple insert. Bookshelt/locker on hullside.
- A La Mer curtain around dinette tie-back on head bulkhead.
- Stereo speakers in ceiling of dinette galley area.
- Dishwasher fitted by shipyard
- Macerator under sink
SALOON:
- Two arm chairs.
- Hi-lo saloon table with maple inserts, made longer.
- Stbd cabinet to include locker, pop-up television and bar with stereo on top.
- Stereo Sony DVD/CD/Tuner. Bottle rack aft on TV and glass rack fwd of TV. Television Sharp Aquos 21",
- Icemaker stbd aft corner near the door
- Saloon portside countertop with chart locker, maple insert on top.
- Two swivel chairs.
- L-settee on portside
- Maple insert on top of stbd Cabinet
- Window screens on all opening windows
- Two pairs of Clarion speakers in saloon
HELM STATION:
- Steering with power assisted hydraulic
- Custom fixed helm seat on stbd side
- Himalaya console at helm station
- Bennett trim tabs indicators
- Electronic /manual tiller side to pilot seat
EXTERIOR:
- Housetop with teak moulding surrounding
- Port and stbd navigation light boards varnished teak with engraved goldleaf letters EASTBAY 54
- Teak decking for side and fwd decks.
- Exterior railings slanted instead of vertical
- Custom s.s. bow rail.
- Upgraded anchor winch Maxwell, all chains, 10 mm DIN766.
- Bow rollers platform extended 6 inches
- Sunpad covered with Softdura, on op of cabin top, for two persons.
- Two flag staff sockets, recessed
- Pair of Clarion speaker under the coming in cockpit with wiring to saloon stereo cabinet
- Removable s,s. ladder with teak steps in cockpit to give access to gangway.
- Reinforcement of transom for installation of gangway.
- Extended swimming platform t,80 mt wide, with s. s. brackets
- Swim ladder on stbd side
- White Sunbrella covers for the five hatches and cockpit settees
- Hull in blue gel-coat
- Boot stripe painted white
- Cove stripe painted white
- Antifouling Interspeed Ultra YBA 333 blue
ELECTRICAL:
- Onan 11KW 12V/220V 50 HZ generator with sound shield and water separator exhaust moulded
- Air-conditioning :
- 2 units 16K for cabins
- 1 unit 12K and 1 unit 16K for saloon/helm deck.
- Mastervolt 50A/24V charger to charge 24V system and 30A/12V charger for 12V system
- Mastervolt inverter-charger Dakar 24/3000-100 connected to service batteries with Mastervolt battery monitor It helm station
- Fluorescent lighting (3 units) in engine room.
- BEP panels and breakers
- Bowthruster Sieipner SP200TC 13,5 HP, operable on 24V
- 3 KW Mastervolt inverter with one extra bank of 24V AGM batteries (2x12V)
MISCELLANEOUS:
- Teak and holly floor throughout
- Fabrics from A La Mer
- Interior gloss varnish
- Steps to engine room covered teak and non skid varnished
- Ce homologation package
SIMRAD PACKAGE:
- Autopilot with AP20 control unit upgraded RFC35R compass and FU50 steering lever
- IS 15 wind meter
- IS 15 combi display including depth and speed
- IS 15 Compass display
- Chart plotter CP42GS Sunview, colorscreen
- Radar RA42C with 4 KW open scanner
HYDRAULIC TENDER-LIFT:
- Made in Germany by BCM
- 450 kg capacity including platform
- With remote control
CENTRALISED VACUUM SYSTEM
|